Liberon Black Bison Fine Wax Antique Pine 150ml
Price range: £7.95 through £12.95 inc VAT
WAX POLISH BLACK BISON
Wax Polish Black Bison is ideal for nourishing and protecting all types of wood, including lacquers and French polishes. Made from a blend of waxes, including high quality carnauba wax, it provides good resistance to finger and water marks, and is ideal for small surfaces. Well-known for its quality and pleasant, distinctive aroma, it feeds, polishes, and helps to prevent wood drying out, and has traditionally been used on antiques. Giving a highly lustrous and hardwearing finish, as well as helping to cover marks and scratches, it will enhance the natural beauty of new wood, and is safe to use on toys and is silicone-free.
• Gives good resistance to finger and water marks.
• Ideal for small surfaces
• Feeds, polishes, and helps prevent wood drying out.
• Highly lustrous and hard wearing
• Helps cover marks and scratches.
• Silicone Free
COVERAGE:
10-12m²
LOCATION:
Interior
DRYING TIME:
Minimum 20 minutes
APPLICATION:
Brush, cloth, or steel wool
TOOL CLEANING:
White Spirit
HOW TO USE
Preparation
Remove old waxes and dirt with Wax and Polish Remover if necessary.
APPLICATION
Apply Wax Polish Black Bison sparingly with a cloth on a delicate or French polished surface, or with Ultra Fine Steel Wool (Grade 0000) when a deeper penetration is required. Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish buff with a Furniture Brush once the last coat has dried.
IMPORTANT
Always test the product on a spare surface or inconspicuous area for colour, compatibility, and result.
CLEANING AND MAINTENANCE
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.
| Brand |
Liberon |
|---|---|
| Colour |
Antique Pine ,Clear ,Dark Oak ,Medium Oak ,Tudor Oak ,Victorian Mahogany |
| Size |
150ml ,500ml |
Instructions: How to Provide Cutting Instructions for Sheet Material
We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.
We need two dimensions, in millimetres, to enable us to cut your chosen material.
If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.
In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.
For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.
If you are unsure about any of your cutting please contact us before placing your order.
We offer a six day a week delivery service which is fast and convenient for getting your larger purchases home.
We are located in Plymouth, Devon and so we are unable to deliver big & bulky items, such as timber, sheet materials, blocks, bricks, aggregates etc to areas other than indicated below.
PLEASE NOTE:
We are unable to guarantee delivery time slots and we only offer a kerbside delivery service.
However we will endeavor to put the items where you want them but this is at drivers discretion and within the reach of any mechanical off load system on the vehicle.
Related products
Liberon Purified Beeswax 200g
Liberon Liming Wax
Liberon Superior Danish Oil
Liberon 3 Pt Touch Up Pen Mahogany
