Timloc Weep Vent

A cavity wall weep/vent specifically intended for use with standard brock, block or stone external walls of thickness between 100-102.5mm.

For use in any situation where water must be discharged from an external wall, e.g. at ground floor slab level, with cavity tray systems, over external lintels, where a cavity must be ventilated and on external walls built from brick, block or stone (100mm or more thickness).

Purpose made and pre-formed to guarantee reliable discharge of water.

Features:

• Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp.joint open.


• Manufactured by injection moulding in polypropylene.


• UV stabilised, colourfast, durable and resistant to decay.


• Manufactured in the UK to BS EN IS0 9001 and BS EN IS0 14001.