Unilin Thin-R XT PR-UF PIR Insulation Board 2400x1200mm
Price range: £16.95 through £64.50 inc VAT
Unilin Thin-R XT PR-UF PIR Insulation Board
Pitched Roofs
Thin-R Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimalintrusion into valuable living space. The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using this product will reduce heat loss while also delivering excellent Thermal Bridging details.
Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above – or above and between – the roof timbers ensures that the structure is kept at or near the internal environmental conditions, reducing thermal stress and condensation risk.
Ground Supported & Suspended Floors
The floor in any building is an area of considerable downward heat loss when not properly insulated. Thin-R Underfloor will significantly improve the U-Value of new and existing floors.
Thin-R Underfloor is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.
Downloads:
Thin-R Declaration of Performance
| Brand |
Unilin |
|---|---|
| Type |
PIR Insulation Board |
| Thickness (mm) |
100mm |
| Thickness |
100mm ,120mm ,150mm ,25mm ,40mm ,50mm ,60mm ,70mm ,75mm ,80mm ,90mm |
| Size |
2400x1200mm |
Instructions: How to Provide Cutting Instructions for Sheet Material
We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.
We need two dimensions, in millimetres, to enable us to cut your chosen material.
If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.
In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.
For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.
If you are unsure about any of your cutting please contact us before placing your order.
We offer a six day a week delivery service which is fast and convenient for getting your larger purchases home.
We are located in Plymouth, Devon and so we are unable to deliver big & bulky items, such as timber, sheet materials, blocks, bricks, aggregates etc to areas other than indicated below.
PLEASE NOTE:
We are unable to guarantee delivery time slots and we only offer a kerbside delivery service.
However we will endeavor to put the items where you want them but this is at drivers discretion and within the reach of any mechanical off load system on the vehicle.
Related products
Jabfloor 70 Polystyrene Sheet 2400x1200x100mm
Isover Spacesaver Loft Roll 100mm (14.13m2)
YBS SuperQuilt Multifoil Insulation 1.2 x 10mtr
Actis Hybris Insulation 50 x 1145 x 1200mm (4)
Ziel-Plast ETX-M Insulation Fixing 8.0 x 115mm (100)
