Soudal FixAll High Tac Grey 290ml

£6.70 inc VAT (£5.58 ex VAT)

6 in stock

Barcode: 5411183031920
Brand: Soudal
Cat No: 101454

Description

Fix ALL High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX® Hybrid Polymer technology.

Characteristics

  • High initial tack reducing the need for initial support.
  • Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer)
  • Easy to apply and easy to tool and finish
  • Remains elastic after curing
  • No odour
  • Does not contain isocyanates, silicones nor solvents
  • Paintable with all water based paints
  • Good colour stability, weather and UV resistance
  • Good adhesion on wet substrates

Applications

  • Sealing and bonding in the building and construction industry.
  • Structural bonding in vibrating constructions.

Directions of Use

Joint dimensions:

  • Minimal width: 2mm (bonding) 5mm (joints)
  • Maximal width: 10mm (bonding) 30mm (joints)
  • Minimum depth: 5mm (joints)
  • Recommendation: width of joint = 2x depth of joint

Application:

  • Method: Manual- or pneumatic caulking gun
  • Application temperature: +5°C until +35°C

Cleaning: Fix ALL Cleaner immediately after
application and before curing

Tooling: with soapy solution before skin formation

Repair with: Fix ALL High tack

Remarks

  • Fix ALL High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test
    before application. The drying time of alkyd resin based paints may increase.
  • Fix ALL High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc… may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests.
  • While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended.
  • This product can not be used as a glazing sealant.
  • Fix ALL High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL High Tack can therefore only be used on the bottom of natural stone tiles.
  • When applying, make sure not to spill any sealant on the surface of materials.

Additional information

Brand

Soudal

Type

Construction Adhesive

Size

290ml